Available on back-order
1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway
The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.
The MGate 5118 gateways support the conversion of J1939 data to Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.
The J1939 protocol is designed to retrieve a wide range of data from CAN-J1939 devices. To eliminate the need to key in all J1939 commands into the gateway by hand, MGate 5118 gateways can auto detect the output commands used by the CAN device.
With a single click in the web console, all of the output commands from your CAN device will be detected by the gateway automatically. The commands will be displayed in the web console’s command list, and then can be further modified by the user if needed. The MGate 5118 gateways make it much easier for users to connect PLCs with CAN devices.
The MGate 5118 gateways support a web console for easy configuration and maintenance, and the built-in traffic monitor function monitors J1939 protocol traffic, allowing users to monitor the status of connected CAN devices, including error count, packet count, and bus-offline. The traffic monitor function can also be used to troubleshoot CAN devices. The diagnostics tool helps users to check CAN device settings and indicates CAN device availability by reading the J1939 network address. In addition, the MGate 5118 gateways have a built-in Live List function for when two or more J1939 devices are connected to the same CAN bus. This function shows the PGN and address of packets transmitted from each device, giving users the ability to gage the loading of the CAN bus.
To detect loose cables, the MGate 5118 gateways support status monitoring and fault protection functions. The status monitoring function notifies a PLC when the cable between the gateway and CAN device is loose. In addition, the fault protection function executes actions predefined by the user when the cable between the gateway and PLC is loose.
Management | |
---|---|
Authentication | |
Encryption | |
Console Port | |
RS-232 | |
RS-422 | |
RS-485-2w | |
Configuration Options | |
Terminator for RS-485 | |
Functions Supported | |
Max. No. of Client Connections | |
Mode | |
Industrial Protocols | |
No. of Ports | |
Connector | |
Baudrate | |
Terminator | |
Isolation | |
Max. No. of Commands | |
Input Data Size | |
Output Data Size | |
microSD Slot | |
Input Voltage | |
Input Current | |
Power Connector | |
Contact Current Rating | |
Housing | |
IP Rating | |
Operating Temperature | 0 to 60°C (32 to 140°F) |
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Available on back-order
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature
24 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -10 to 60°C operating temperature
11 in stock (can be backordered)
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -10 to 60°C operating temperature
2 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, PROFINET enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -10 to 60°C operating temperature
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C operating temperature
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C operating temperature
Available on back-order
NAME | TYPE | CHECKSUM | VERSION | OPERATING SYSTEM | RELEASE DATE |
---|---|---|---|---|---|
11.6 MB |
Utility |
SHA-512
|
v1.3 |
|
Jun 29, 2023Release notes |
2.0 MB |
Utility |
SHA-512
|
v1.3 |
|
Jun 29, 2023Release notes |
2.2 MB |
Utility |
SHA-512
|
v2.7 |
|
Jun 28, 2023Release notes |
32.8 MB |
Software Package |
SHA-512
|
v1.4 |
|
May 02, 2023Release notes |
277.4 MB |
Software Package |
SHA-512
|
v1.1.0 |
|
Feb 08, 2023Release notes |
417.7 MB |
Software Package |
SHA-512
|
v3.2.8 |
|
Oct 31, 2022Release notes |
8.6 MB |
Firmware |
SHA-512
|
v2.3 |
|
Apr 29, 2022Release notes |
24.3 MB |
Software Package |
SHA-512
|
v1.1 |
|
Mar 31, 2021Release notes |
2.2 MB |
Software Package |
SHA-512
|
v1.1 |
|
Mar 31, 2021Release notes |
24.6 KB |
Software Package |
SHA-512
|
v1.1 |
|
Sep 02, 2019Release notes |
12.6 KB |
Software Package |
SHA-512
|
v2.0 |
|
Mar 23, 2018Release notes |
13.6 KB |
Software Package |
SHA-512
|
v2.0 |
|
Mar 23, 2018Release notes |
8.0 MB |
Firmware |
SHA-512
|
v2.0 |
|
Mar 07, 2018Release notes |
15.2 KB |
Software Package |
SHA-512
|
v1.0 |
|
Dec 15, 2016Release notes |
NAME | TYPE | VERSION | RELEASE DATE |
---|---|---|---|
431.1 KB |
QIG | v1.3 | May 18, 2023 |
1.0 MB |
Manual | v2.1 | Mar 28, 2023 |
806.8 KB |
Datasheet | v1.1 | May 19, 2022 |
6.9 MB |
Manual | v2.1 | Apr 25, 2022 |
847.7 KB |
Tech Note | v2.1 | Jan 13, 2022 |
306.8 KB |
2D CAD | Dec 16, 2016 |
© 2023 IT4 Automation Ltd. All Rights Reserved