IMC-P101-S-ST-T
0 products currently in stock. Call our team for lead times if needed.
IMC-P101-S-ST-T
Industrial PoE Media Converter, single mode, ST connector, -40 to 75°C
0 products currently in stock.
The stock was last updated at 2:06 pm Tuesday, 23 April, 2024. Please contact us for lead times if needed.
Introduction
IMC-P101 Ethernet-to-fiber media converters provide Ethernet media
conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors).
These converters are classified as power source equipment (PSE), and
when used in this way, they provide up to 30 Watts to powered devices
(PDs), eliminating the need for additional wiring. The IMC-P101 converters
support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, and
MDI/MDI-X auto-sensing, providing a complete solution for your industrial
Ethernet network.
Additional information
| Input Current | 360 mA @ 12 to 57 VDC (HW Rev. 1.1.0 and later) 430 mA @ 46 to 57 VAC (HW Rev. 1.0.1 and prior) |
|---|---|
| Input Voltage | 12 to 57 VDC, (HW Rev. 1.1.0 and later), 46 to 57 VDC, (HW Rev. 1.0.1 and prior) |
| Overload Current Protection | |
| Housing | |
| Dimensions | |
| EMI | |
| EMC | |
| EMS | |
| Time | |
| Standards | |
| Warranty Period | |
| Details | |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
Need Support?
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Product Brand
IMC-P101 Series
Industrial Gigabit Ethernet-to-Fiber Industrial Gigabit Ethernet-to-Fiber Media Converter, single-mode, SC
connector, Link Fault Pass-Through, Auto Speed, 10 KM
Ind. 16 Port Protocol Gateway, RS-422/485 Software Selectable, 2.5kV isolation, DC TB3
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, PROFINET enabled
USB based Auto Backup Configurator, Configuration backup/restoration, firmware upgrade and log file storage tool for managed Ethernet switches and Routers, 0 to 60°C operating temperature
