IMC-P101 Ethernet-to-fiber media converters provide Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors). These converters are classified as power source equipment (PSE), and when used in this way, they provide up to 30 Watts to powered devices (PDs), eliminating the need for additional wiring. The IMC-P101 converters support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.
360 mA @ 12 to 57 VDC (HW Rev. 1.1.0 and later) 430 mA @ 46 to 57 VAC (HW Rev. 1.0.1 and prior)
12 to 57 VDC, (HW Rev. 1.1.0 and later), 46 to 57 VDC, (HW Rev. 1.0.1 and prior)
|Overload Current Protection|
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150
-40 to 75°C (-40 to 167°F)
If you would like additional support on any of our products, Don’t hesitate to give us a call or email us today!
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Address: Project House, Eclipse Industrial Estate, 30 West Hill, Epsom, Surrey, KT19 8JD
Phone: +44 (0) 1372 888 035
Email: [email protected]
Keep up on our always evolving product features and technology. Enter your e-mail to find out more.
© 2022 IT4 Automation Ltd. All rights reserved.