SE5201B-E-T-C1-TB-TW
26968 products currently in stock. Call our team for lead times if needed.
SE5201B-E-T-C1-TB-TW
Industrial LTE Cat.1 low-power Gateway, 2x LAN, 1x Serial, DIO, Single SIM, DIN-rail, TB
26968 products currently in stock.
The stock was last updated at 6:49 am Saturday, 27 April, 2024. Please contact us for lead times if needed.
ATOP SE5201B IoT gateway is a super-low power consumption LTE gateway. In addition to high EMC protection, widetemperature operation, and rugged metal housing, SE5201B series has a configurable power management mechanism to reduce device power consumption. It is suitable for various operations, especially in power-challenged environments.
Efficient Power Consumption
SE5201B supports Cellular LTE Cat-1. With extended idle and sleep modes, these standards have lower power consumption than other LTE standards. SE5201B further enhances this efficiency by using less than 100 mW power in sleep mode, allowing easy deployment in power-challenged environments.
Expandable SD Storage
SE5201B reserves the flexibility to extend its storage capacity through a built-in SD slot, so you can store more data on the IoT gateway for work efficiency as well.
Exceptional Security
Integrating Firewall, Zone forwarding, and VPN functions, ATOP SE5201B allows you to connect your industrial network to the internet without fearing intrusions to your organization data.
Endurance of Harsh Environments
ATOP SE5201B is proven to run at its maximum loading in the harshest EMC and climate environments.
APPLICATION CASE
As a Low Power Consumption IoT Gateway
SE5201B can act as a low power consumption gateway. Through its smart power management mechanism, the device switches to sleep mode or hibernation mode during non-service phases, and can be woken via scheduled
management policies to serve functions when needed. It is especially suited where power supply is limiting, such as in systems powered by solar batteries.
As a Cyber Security Gateway
SE5201B is also designed to act as a cyber security gateway. Un-secured network access will be denied by the firewall protection, while secured VPN tunnels enhance the security of your data transmission during the network communication. Security and encryption are indispensable to IoT, and therefore fundamental functions of SE5201B.
Additional information
Model Name | |
---|---|
Standards | 802.3 for 10BaseT(X) 802.3u for 100BaseT(X), GPS/GLONASS/BeiDou/Galileo/QZSS, LTE Cat 1 |
Ports | 1 x RS-232/RS-485-2W, software selectable, 2 x RJ-45 10/100 BaseT(X), 1.5kV isolation |
Connector Type | |
Baud Rate | |
Parity | |
Data Bits | |
Stop Bits | |
Flow Control | |
Terminal Resistor (Ω) | |
Pull High/Low Resistor (Ω) | |
Digital Input & Output | 1 x DI, Photo coupled isolated (5VDC) 1 x DO, Digital Relay Output (1A@24VDC) |
Default/Reset Button | |
Mode Button | |
SIM card slots | |
SD Slot |
Need Support?
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Product Brand
SE5201B Series
Industrial LTE Cat.1 low-power Gateway, 2x LAN,1x Serial, DIO, Dual SIM, DIN-rail,DSub9,GNSS
Industrial LTE Cat.1 low-power Gateway, 2x LAN, 1x Serial, DIO, Single SIM, DIN-rail, DSub9
Industrial LTE Cat.1 low-power Gateway, 2x LAN,1x Serial, DIO, Dual SIM, DIN-rail,TB,GNSS
Industrial LTE Cat.1 low-power Gateway, 2x LAN, 1x Serial, DIO, Single SIM, DIN-rail, DSub9
Industrial LTE Cat.1 low-power Gateway, 2x LAN,1x Serial, DIO, Dual SIM, DIN-rail,DSub9,GNSS
Industrial LTE Cat.1 low-power Gateway, 2x LAN, 1x Serial, DIO, Single SIM, DIN-rail, TB
Industrial LTE Cat.1 low-power Gateway, 2x LAN,1x Serial, DIO, Dual SIM, DIN-rail,TB,GNSS
10-Port Unmanaged Gigabit Ethernet Switch with 2 100/1000 SFP,4 PoE, 12~48VDC PoE booster
16-Port Managed Gigabit Ethernet Switch with 12 SFP and 4 x 10 Gigabit SFP uplink ports
12-Port Managed Gigabit Layer-3 Switch with 4 RJ45, 4 SFP and 4 x 10 Gigabit SFP uplink ports
12-Port Layer-3 IEC 61850-3 Gigabit switch with 4 SFP ports, 110-370 VDC power input
16-Port Modbus Gateway with RJ45 serial, RS-422/485, 2.5KV Isolation, 24-48 VDC power input
L3 Switch Core, 4x1G SFP Uplinks, 3 Module Slots, 2x 100~220VAC; 2x 48~57VDC PoE input
Industrial LTE Cat.1 low-power Gateway, 2x LAN,1x Serial, DIO, Dual SIM, DIN-rail,DSub9,GNSS
Industrial 8-Port Serial Device Server, Terminal Block, RS-232/422/485, 3kV Isolation, SFP, dual pwr
IP68 rated 2-Port Serial Device Server with M12 connectors, certified by EN50155 & EN50121-4
Firmware
Version | Name | Time | Size | Download |
---|---|---|---|---|
v0.13 | SE5201B Firmware(Quectel module) | 2023-05-04 | 14.44 MB | Download |
v1.04 | SE5201B Firmware(Telit module) | 2023-05-04 | 14.45 MB | Download |
Datasheet
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.3 | Datasheet EN | 2023-11-01 | 402 KB | Download |
v1.2 | Datasheet EN | 2023-08-10 | 394.19 KB | Download |
v1.1 | Datasheet EN | 2023-06-01 | 392.09 KB | Download |
v1.0 | Datasheet EN | 2023-04-26 | 411.13 KB | Download |
Manual
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.0 | SE5201B/CR5201B User Manual | 2023-04-26 | 3.43 MB | Download |
Hardware Installation Guide
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.0 | SE5201B/CR5201B Hardware Installation Guide | 2023-04-26 | 7.54 MB | Download |
Test reports
Version | Name | Time | Size | Download |
---|---|---|---|---|
SE5201B EU Declarations of Conformity | 2023-05-03 | 370.22 KB | Download |