Available on back-order
Ind. 8 Port Modbus Gateway, 100BASE-FX SFP slot, DB9
Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422(*), and Ethernet. The ease-of-use configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure. Industrial EMC protection, IEC61850-3 compliance, and wide temperature operation capability render MB5908A ready for every mission.
Advanced embedded security
MB5908A embeds IPsec VPN Encryption, that allows you to tunnel your data securely throught the internet and prevent unauthorized control of your Serial Devices by malicious people.
Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. All of this, in bidirectional
mode: Ethernet and Serial ends can selected to be either master or slave
Modbus ID Routing
Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus
hardware configuration into a simple network that can be easily managed.
* 3kV isolated version only supports RS-422/485
Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) – RJ45 version IEEE 802.3u 100Base-FX – SFP version |
---|---|
Network mode | |
Connector ports | |
Connector | 10-Pin Terminal Block, D-Sub9 (DB models, supporting only 5-pin RS-232 mode) or 5.08mm 5-Pin Terminal block (TB Models) |
Ports | |
Mode | |
Serial Isolation | |
Baud Rate | |
Data Bits | |
Stop Bits | |
Flow Control | |
Protocols | |
Configuration | |
VirtualCOM | |
Modbus concentrator | |
Modbus redundant concentrator | |
Rated Supply Voltage | Redundant 24-48 VDC or Redundant 100-240 VAC/ 100-370 VDC (HV Series) |
Input Voltage Range | Redundant 19.2-52.8 VDC or Redundant 85-264 VAC/ 100-370 VDC (HV Series) |
Input Current | |
Power Consumption | |
Power Redundancy | |
Reverse Polarity Protection | |
Housing | |
Dimension (W x H x D) | |
Weight | |
Installation | |
Reset Button | |
Operating Temperature | -40°C~80°C (-40°F~176°F) |
Storage Temperature | |
Ambient Relative Humidity |
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature
8 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -10 to 60°C operating temperature
4 in stock (can be backordered)
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -10 to 60°C operating temperature
2 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, PROFINET enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -10 to 60°C operating temperature
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C operating temperature
2 in stock (can be backordered)
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C operating temperature
Available on back-order
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.0 | Linux_Driver_x64 | 2021-03-29 | 210.16 KB | Download |
v5.60 | Management Utility for Windows | 2021-01-18 | 23.65 MB | Download |
v5.20 | Management Utility for Windows | 2016-10-28 | 16.21 MB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.68c | MB59XX Firmware (Download and install this file first if your present firmware version is 1.46 or earlier) | 2022-10-27 | 16.14 MB | Download |
v1.68 | MB59XX Firmware | 2022-09-13 | 16.15 MB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v0.8 | Datasheet EN | 2023-11-03 | 373.12 KB | Download |
v0.7 | Datasheet EN | 2021-04-06 | 623.89 KB | Download |
v0.6 | Datasheet EN | 2019-06-05 | 467.53 KB | Download |
v0.5 | Datasheet EN | 2018-05-02 | 561.58 KB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.3 | MB59XX User Manual | 2018-04-17 | 3.7 MB | Download |
v1.4 | MB59XX User Manual | 2019-11-19 | 3.76 MB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.4 | MB5908A Hardware Installation Guide | 2024-01-30 | 3.37 MB | Download |
v1.3 | SE5908-SE5916A-MB5908A-MB5916A-PG5900A-PG5908A-PG5916A Hardware Installation Guide | 2017-01-23 | 4.39 MB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
MB5908A Declarations of Conformity | 2023-03-20 | 312.95 KB | Download |
© 2023 IT4 Automation Ltd. All Rights Reserved