Available on back-order
Industrial 4-Port Modbus Gateway, 100/1000BASE-X with SFP Slot, DB9
Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422, and Ethernet. The ease-of use configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure. Industrial EMC protection and wide temperature operation capability make MB5904D ready for every mission. And if cabling is an issue, the PoE-powered version can allow MB5904D to be powered through PoE.
Advanced embedded security and advanced features
Relax. MB5904D Modbus Gateway supports OpenVPN and IPsec VPN encryption, allowing you to safely use the device over the internet without worrying about malicious attacks, data sniffing or unintentional remote control of your Modbus slaves. On your LAN, RSTP protocol will provide an additional layer of security in case of link losses.
Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. All of this, in bidirectional mode: Ethernet and Serial ends can selected to be either master or slave Modbus ID Routing. Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus hardware configuration into a simple network that can be easily managed.
| Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) IEEE 802.3u for 100Base-X (SFP version only) IEEE 802.3z for 1000Base-X (SFP version only), USB 2.0 |
|---|---|
| PoE standard supported | |
| LAN Mode | |
| Connector ports | 2x 10/100BASE-T(X) RJ-45 or 2x 100/1000 Base-X SFP Slots (SFP version) |
| Connector | 1×2 5 pin 3.81mm Terminal Block, or D-sub9 connector, 7-Pin 5.08mm Lockable Terminal Block, USB A Type |
| Ports | |
| Mode | |
| Baud Rate | |
| Parity | |
| Data Bits | |
| Stop Bits | |
| Isolation | |
| USB Ports | |
| Protocols | |
| Configuration | |
| VirtualCOM | |
| Modbus concentrator | |
| Modbus redundant concentrator | |
| Input Voltage | Dual 12 – 48VDC (non-PoE Models); or through Ethernet Cable (PoE versions) |
| Input Current (@ 12VDC) | |
| Power Consumption | |
| Power Redundancy | |
| Reverse Polarity Protection | |
| Relay Output | |
| Housing | |
| Dimension (W x H x D) | |
| Weight | |
| Installation | |
| Reset Button | |
| Operating Temperature | -40°C~85°C (-40°F~185°F) |
| Storage Temperature | |
| Ambient Relative Humidity |
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Industrial 4-Port Modbus Gateway, 100/1000BASE-X with SFP Slot, 3kV Isolation
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, EtherNet/IP enabled
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -10 to 60°C operating temperature
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -10 to 60°C operating temperature
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, PROFINET enabled
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -10 to 60°C operating temperature
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, EtherNet/IP enabled
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C operating temperature
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C operating temperature
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.0 | Linux_Driver_x64 | 2021-03-29 | 210.16 KB | Download |
| v5.60 | Management Utility for Windows | 2021-01-18 | 23.65 MB | Download |
| v5.20 | Management Utility for Windows | 2016-10-28 | 16.21 MB | Download |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.68c | MB59XX Firmware (Download and install this file first if your present firmware version is 1.46 or earlier) | 2022-10-27 | 16.14 MB | Download |
| v1.68 | MB59XX Firmware | 2022-09-13 | 16.15 MB | Download |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.1 | Datasheet EN | 2023-11-01 | 337.85 KB | Download |
| v0.9 | Datasheet EN | 2020-07-10 | 687.52 KB | Download |
| v0.8 | Datasheet EN | 2018-05-18 | 574.42 KB | Download |
| v0.7 | Datasheet EN | 2018-05-02 | 573.98 KB | Download |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.4 | MB59XX User Manual | 2019-11-19 | 3.76 MB | Download |
| v1.3 | MB59XX User Manual | 2018-04-17 | 3.7 MB | Download |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.1 | SE5904D/MB5904D/PG5904D Hardware Installation Guide | 2016-03-01 | 3.81 MB | Download |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| MB5904D Declarations of Conformity | 2023-03-10 | 290.86 KB | Download |
© 2023 IT4 Automation Ltd. All Rights Reserved
