ioMirror E3200 Series
Direct input-to-output signal communication over IP
High-speed peer-to-peer I/O within 20 ms
One physical alarm port for connectivity status
Utility for quick and easy web-based settings
Local alarm channel
Remote alarm message
Supports Modbus TCP for remote monitoring
Optional LCD module for easy configuration
Introduction
The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With the ioMirror, remote sensors can be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures, and signals can be transmitted over virtually unlimited distances, without noise problems.
Split Sensor Signals to 16 Different Locations
The ioMirror E3200 Series can split one input signal to two digital output channels at two different IP addresses. Eight tank level signals can be monitored at 16 different display panels, all at the same time.
Local Alarm and Remote Alarm Messages for Monitoring Connectivity
The ioMirror E3200 Series has a 24 VDC alarm output channel that can activate an attached buzzer or LED display when the connection fails. In addition, both ioMirror modules can send messages to the ioEventLog software, ensuring that at least one of the warning messages will reach the ioEventLog software.
PRODUCTS IN THIS SERIES
Other Series
Name | Type | Version | Operating System | Release Date | |
---|---|---|---|---|---|
|
Firmware |
E1251FDFE99ADC63C7031EA83D9A5450B31AB236AF1E67A2D0A7212C17999901AF8242F9115E3D7CE8F90E928A453330AE78394AC7A2811FB9598CB4957BD224 SHA-512 |
v1.4 |
|
Sep 18, 2020 Sep 18, 2020 Release notes |
|
Firmware |
BC7EFEA9A99D4F3706551C6269C2BC54E03F52500962619EF7CBC61CCDD76C5FA6C3275AC0278940D96FDCE8E3698006F4117FE4C757B230F7517C62771327E5 SHA-512 |
v1.0 |
|
Feb 11, 2018 Feb 11, 2018 Release notes |
|
Utility |
C0897104272784DEBB5459E35ED48B836DB1E25A8473EEC938110B2CA0E26E8278C9AFA512D0CDD030652841587F9378EA678C4C89FE2772FEBD54E77D65A693 SHA-512 |
v1.1 |
Show More
|
Jun 14, 2017 Jun 14, 2017 Release notes |
|
Utility |
D1CFF70DCC4A9312A8190FB10C7F541113757E740F429251278FDA3DAF980D72B72E4E2D290B89D53DBC415024FC4540C3F2B4FC2DAC6819004B022735336FE4 SHA-512 |
v1.6 |
Show More
|
Jun 14, 2017 Jun 14, 2017 Release notes |
|
Software Package |
20CC80EAC7961C4C2DAC985BCADAAEE349E32156B72A9B4A449F06744A59E5ACF79592A24FA993C0C86BF0120B6150F97977BCE0BB83563CCD595898B8A5D9FA SHA-512 |
v1.0 |
|
Jan 10, 2017 Jan 10, 2017 Release notes |
|
Utility |
3562085E33D3845098EE662C3615751A75E29CF33AC83543E9A684E4BA8BAEAD4F78CA7923203FBCCC1A646C008688610E1C58DAB9755191267782D15736F723 SHA-512 |
v1.3 |
Show More
|
Jun 02, 2016 Jun 02, 2016 Release notes |
|
Utility |
BE857B65E8DDC05B20D53619C585025A19BBA0A3463BE858A3B0A9E5CCC2E9CC398D2C1BC3E142FA974F8C7FE05831E7F1C073292EC136EEFD1C8BA353FE41C5 SHA-512 |
v1.4 |
Show More
|
Dec 15, 2008 Dec 15, 2008 Release notes |
Show All
S
Supported Documents
Name | Type | Version | Release Date |
---|---|---|---|
|
QIG | v1.1 |
May 05, 2021 May 05, 2021 |
|
Datasheet | v1.1 |
Aug 06, 2020 Aug 06, 2020 |
|
Manual | v1.0 |
Jun 26, 2017 Jun 26, 2017 |
|
2D CAD | Â | May 09, 2007 May 09, 2007 |
Show All