ICF-1170I Series
Transmits data up to 2 km over optical fiber
Converts CAN signals to fiber and fiber to CAN signals
Baudrate up to 1 Mbps
Dual power inputs for redundancy
DIP switch for 120 ohm terminal resistance
DIP switch for fiber test mode
LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
Wide-temperature model available for -40 to 85°C environments
Fully compatible with the ISO 11898 standard
Introduction
The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with alarm contact relay to ensure that your CAN bus system will remain online.
Fiber Test Mode
Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and it provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the Tx side, the Fiber Rx LED will light up.
PRODUCTS IN THIS SERIES
Industrial CAN bus to Fiber Optic Converter, ST Multi-mode, -40 to 85 ℃ Temperature
Other Series
Name | Type | Version | Release Date |
---|---|---|---|
|
Datasheet | v1.3 |
Dec 13, 2022 Dec 13, 2022 |
|
QIG | v6.1 |
May 04, 2021 May 04, 2021 |
|
Tech Note | v1.0 |
Apr 20, 2020 Apr 20, 2020 |
|
2D CAD | Â | May 20, 2016 May 20, 2016 |
Show All