Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port, TB14, 4G, 2 DI, 2 DO, EU
Product Description
With its powerful architecture and industrial-grade hardware, PG5901B provides seamless protocol conversion for devices in industrial network operations. With its rugged construction, PG5901B is designed to perform in the most demanding of industries – including power distribution, oil and gas, manufacturing, and agriculture. As a highly reliable and fault-tolerant Industrial Protocol Gateway, also features integrated 3G/4G connectivity, making it ideal for any industry looking to implement devices at remote locations for smart grid operations. Serial reach can also be extended with the Gateway’s redundant Ethernet.
Performance
Its rugged, reliable hardware features high EMC protection, wide temperature operation, and programming and installation flexibility in one device, while its advanced performance protects your data over the Internet with secure IPsec VPN or OpenVPN tunnels, with its powerful CPU providing up to 37.9Mbps* software-assisted AES encryption.
Configuration
The device can be easily configured using eNode Designer, a user-friendly Windows utility based on Java. The tool allows users to assign various protocols to different ports, define serial port settings, and define protocol-specific parameters, such as data point mapping. eNode uses a project file to represent the system as a whole, with eNode modules representing individual network devices and protocol applications for individual configuration – such as defining where data point information enters and leaves the eNode Designer system.
Application
The protocol gateway’s embedded protocol stacks allow:
– Seamless conversion
– Exception/error Management
– Unsolicited event management for the protocols requiring them (such as DNP3)
– High performance
– Low cost
In this example, a Modbus Serial HMI is easily connected to a DNP3 IED through Atop’s Protocol Gateway. The host HMI’s role is a Modbus Serial Master while the end-device to be accessed is a DNP3.0 Ethernet Server Slave. To the host HMI, Atop’s Protocol Gateway acts seamlessly as a Modbus Serial Slave, answering the polling commands and write commands that come from the by using a virtual Modbus ID. Simultaneously, Atop’s Protocol Gateway acts as a DNP3 Ethernet Client to any end-device whose DNP3 address is mapped to the virtual Modbus ID that the HMI is accessing.
WARNING
All gateway functions listed in the datasheet refer to the “Gateway” role, and not which “host” or “slave” the gateway is connected to. The SKU shown in this example is “MBSS-DNEC” (Modbus Serial Slave to DNP3.0 Ethernet Client).
Speed | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) |
---|---|
Connector ports | |
Standard | |
Band Options | |
Maximum 4G throughput | |
Connector | 14-Pin 5.08mm Terminal Block (integrated with DI/DOs) or D-Sub9 connector, 3-Pin 5.08mm Lockable Terminal Block |
Port | |
Mode | |
Baud Rate | |
Parity | |
Data Bits | |
Stop Bits | |
USB Speed | |
USB Connector | |
Digital Inputs (DI) | |
Digital Outputs (DO) | |
Input Voltage | |
Power Consumption | |
Power Redundancy | |
Reverse Polarity Protection | |
Protocols | |
Additional features | |
Security | VPN through IPsec tunneling (max 10 tunnels), OpenVPN, and PPTP on cellular or LAN |
Network | |
Housing | |
Dimension (W x H x D) | |
Weight | |
Installation | |
Reset Button | |
Operating Temperature | -40°C~70°C (-40°F~158°F) |
Storage Temperature | |
Ambient Relative Humidity |
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Ind. Cellular Protocol Gateway with 1 Serial port, DB9,4G , Internal Battery, EU
Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port, DB9,4G, Internal battery, US
Available on back-order
Available on back-order
Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port,TB14,4G,2DI,2DO,Pwr Bank, EU
Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port, TB14,4G,2DI,2DO,Pwr Bank, US
Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port,TB14,4G,2DI,2DO,GPS,Pw Bank,EU
Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port, TB14,4G,2DI,2DO,GPS,Pwr Bank,US
Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port, TB14, 4G, 2 DI, 2 DO, GPS, EU
Available on back-order
Ind. Cellular Protocol Gateway with 1 Serial port, TB14, 4G, 2 DI, 2 DO, GPS, US
Available on back-order
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature
13 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -10 to 60°C operating temperature
4 in stock (can be backordered)
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -10 to 60°C operating temperature
2 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, PROFINET enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -10 to 60°C operating temperature
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C operating temperature
2 in stock (can be backordered)
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C operating temperature
Available on back-order
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.29.011 | eNode designer – Caution: v1.27 and newer only support Protocol Gateway version 0.58 or newer | 2023-08-11 | 9.1 MB | Download |
v1.29 | eNode designer – Caution: v1.27 and newer only support Protocol Gateway version 0.58 or newer | 2023-04-19 | 8.87 MB | Download |
v1.28 | eNode designer – Caution: v1.27 and newer only support Protocol Gateway version 0.58 or newer | 2022-07-06 | 6.49 MB | Download |
v1.27 | eNode designer – Caution: v1.27 and newer only support Protocol Gateway version 0.58 or newer | 2021-04-16 | 6.49 MB | Download |
v1.0 | Tcpdump for diagnosis | 2021-03-29 | 1.22 MB | Download |
v5.60 | Management Utility for Windows | 2021-01-07 | 23.65 MB | Download |
v1.26 | eNode Designer for Windows | 2020-05-11 | 6.45 MB | Download |
v5.20 | Management Utility for Windows | 2016-10-28 | 16.21 MB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v0.63 | PG59XX DNP3.0-Ethernet-Server-0.63 | 2023-07-12 | 138.67 MB | Download |
v0.63 | PG59XX DNP3.0-Serial-Slave-0.63 | 2023-07-12 | 138.67 MB | Download |
v0.63 | PG59XX IEC60870-5-101-Serial-Slave-0.63 | 2023-07-12 | 138.67 MB | Download |
v0.63 | PG59XX IEC60870-5-104-Ethernet-Server-0.63 | 2023-07-12 | 138.67 MB | Download |
v0.63 | PG59XX IEC61850-Ethernet-Server-0.63 | 2023-07-12 | 138.67 MB | Download |
v0.63 | PG59XX Modbus-RTU-ASCII-Serial-Slave-0.63 | 2023-07-12 | 118.86 MB | Download |
v0.63 | PG59XX Modbus-TCP-Ethernet-Server-v0.63 | 2023-07-12 | 118.86 MB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.8 | Datasheet EN | 2023-11-01 | 200.51 KB | Download |
v1.7 | Datasheet EN | 2022-12-01 | 214.56 KB | Download |
v1.6 | Datasheet EN | 2022-11-07 | 214.64 KB | Download |
v1.3 | Datasheet EN | 2021-02-09 | 279.8 KB | Download |
v1.2 | Datasheet EN | 2020-11-16 | 279.61 KB | Download |
v1.1 | Datasheet EN | 2020-03-18 | 270.09 KB | Download |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.5 | eNode Designer User Manual DNP3.0 | 2023-08-11 | 5.47 MB | Download |
v1.6 | eNode Designer User Manual IEC 61850 | 2023-08-11 | 948.18 KB | Download |
v1.4 | eNode Designer User Manual IEC60870-5-101/104 | 2023-08-11 | 2.72 MB | Download |
v1.5 | eNode Designer User Manual IEC60870-5-103 | 2023-08-11 | 1.19 MB | Download |
v1.5 | eNode Designer User Manual Modbus | 2023-08-11 | 1.24 MB | Download |
v1.7 | Getting started with Atop PG and eNode Designer | 2023-08-11 | 3.01 MB | Download |
© 2023 IT4 Automation Ltd. All Rights Reserved