ioLogik E2262

0 products currently in stock. Call our team for lead times if needed.

£484.00

Smart Ethernet remote I/O with Click&Go Logic

ioLogik E2262

£484.00

Smart Ethernet remote I/O with Click&Go, 8 TCs, 4 DOs

Series Description

Introduction

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

PC-Free Alarm and Control Intelligence

This device supports simple yet powerful Click&Go™ technology to configure event-driven reports and alarms delivered over email, TCP/UDP, or SNMP traps, giving you a powerful and effective tool for delivering timestamped status updates in real time.

With built-in Click&Go™ intelligence, this device can be configured for simple outputs paired up with simple input triggers without the need for a PC controller. This allows it to be configured to automatically report I/O events according to conditions specified by the user.

 

SNMP for Ethernet Device Management

By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and transportation.

Push Technology for Events and Alarms

When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.

Additional information

Language

Digital Output Channels

Thermocouple Channels

Buttons

I/O Type

LED Indicators

Magnetic Isolation Protection

Configuration Options

Management

MIB

Time Management

Authentication

Encryption

Security Protocols

Functions Supported

Mode

Connector

RS-485-2w

Industrial Protocols

Real-time Clock (RTC)

Power Connector

No. of Power Inputs

Input Voltage

Power Consumption

Dimensions

Weight

Installation

Wiring

Housing

Operating Temperature

-10 to 60°C (14 to 140°F)

Safety

EMC

Need Support?

We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!

Product Brand

Moxa is a leading provider of edge connectivity, industrial computing, and network infrastructure solutions for enabling connectivity for the Industrial Internet of Things (IIoT). With over 35 years of experience, they help industrial enterprises overcome roadblocks and achieve operational resilience through purpose-built OT networking and cybersecurity. They are dedicated to changing the world through the power of connectivity, driving industrial transformation.

ioLogik E2200 Series

A series refers to a collection of related products or components designed to work together seamlessly, typically within a specific industry or application. These series often share similar features and functionalities, ensuring compatibility and ease of integration for users.

IEC 62439-3 managed redundancy module with 3 SGMII pinouts reserved for 2 IEC 62439-3 ports and 1 standard Ethernet port, -40 to 85°C operating temperature

£759.00

Add to quote

L2 Managed Ethernet switch with 8 10/100BaseT(X) and 2 10/100/1000 Base-T(X) M12 ports with bypass relay function, 24 – 110 VDC dual power input, -40 to 75℃ operation temperature

£2,090.00

Add to quote

L2 Managed Ethernet switch, 16 * 10/100BaseT(X) with 802.3at PoE+, 2 * 10/100/1000 Base-T(X) with 802.3at PoE+, 2 * 1000 BaseLSX Q-ODC ports and 8 * 10/100BaseT(X) M12 connectors, power input 24 – 110 VDC, -40 to 75℃ operation temperature

£6,163.00

Add to quote

Industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with SC connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature

£461.00

Add to quote

Industrial Media Converter, single mode, SC, 40 km, -40 to 75°C, IECEx Certification Approval

£442.00

Add to quote

Industrial LTE Cat 1 cellular gateway, B3/B5/B8/B28, -30 to 70°C

£556.00

Add to quote

2 -port RS-232/422/485 wireless device server with 802.11a/b/g /n WLAN, 8DI, 4DO, CN Band

£555.00

Available on back-order

Add to quote

2 Port Terminal Server, 3 in 1, 100FX Single Mode Fiber, SC Connector, 12-48VDC, -40 to 75°C

£555.00

Add to quote

10/100M Ethernet Network Enabler for RS-422/485 device, pin header

£95.00

Add to quote

2-port RS-232/422/485 serial device server with 2 KV isolation, 10/100MBaseT(X), 1KV serial surge, -40~75℃, IECEx Certification Approval

£585.00

Add to quote

Software, Firmware, and Drivers

NAME TYPE CHECKSUM VERSION OPERATING SYSTEM RELEASE DATE
Software Package for MXview One Series (Windows version)

277.4 MB

Software Package
SHA-512
v1.1.0
  • Windows 10
  • Windows 11
  • Windows Server 2016

Feb 08, 2023Release notes
Software Package for MXview One Series (Linux version)

251.0 MB

Software Package
SHA-512
v1.1.0
  • Linux
Feb 01, 2023Release notes
MX-AOPC UA Logger

91.7 MB

Utility
SHA-512
v2.2
  • Windows 10
  • Windows 11
  • Windows 7

Nov 28, 2022Release notes
MX-AOPC UA Server

112.6 MB

Utility
SHA-512
v2.2
  • Windows 10
  • Windows 11
  • Windows 7

Nov 28, 2022Release notes
MXview

417.7 MB

Software Package
SHA-512
v3.2.8
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2

Oct 31, 2022Release notes
ioAdmin Configuration Utility

7.7 MB

Utility
SHA-512
v3.20
  • Windows 10
  • Windows 11
  • Windows 7

Jul 12, 2022Release notes
MX-AOPC UA Server

37.6 MB

Utility
SHA-512
v2.1
  • Windows 10
  • Windows 7
  • Windows 8

May 16, 2019Release notes
MX-AOPC UA Logger

31.8 MB

Utility
SHA-512
v2.1
  • Windows 10
  • Windows 7
  • Windows 8

May 16, 2019Release notes
Software Package for ioLogik E2200 Series

25.9 MB

Software Package
SHA-512
v1.0
Jan 15, 2018Release notes
MX-AOPC UA Server

36.3 MB

Utility
SHA-512
v1.6
  • Windows 10
  • Windows 7
  • Windows 8

Jun 14, 2017Release notes
MX-AOPC UA Logger

44.2 MB

Utility
SHA-512
v1.1
  • Windows 10
  • Windows 7
  • Windows 8

Jun 14, 2017Release notes
Firmware for ioLogik E2200 Series (E2210)

2.4 MB

Firmware
SHA-512
v3.13
Jan 20, 2017Release notes
Firmware for ioLogik E2200 Series (E2214)

1.2 MB

Firmware
SHA-512
v3.12
Jan 19, 2017Release notes
Firmware for ioLogik E2200 Series (E2212)

1.2 MB

Firmware
SHA-512
v3.14
Jan 19, 2017Release notes
Firmware for ioLogik E2200 Series (E2240)

2.4 MB

Firmware
SHA-512
v3.12
Jan 19, 2017Release notes
Firmware for ioLogik E2200 Series (E2242)

1.3 MB

Firmware
SHA-512
v3.12
Jan 19, 2017Release notes
Firmware for ioLogik E2200 Series (E2262)

1.2 MB

Firmware
SHA-512
v3.12
Jan 19, 2017Release notes
Firmware for ioLogik E2200 Series (E2260)

1.2 MB

Firmware
SHA-512
v3.13
Jan 19, 2017Release notes
MXIO Library for Linux Kernel 3.x

2.1 MB

Library
SHA-512
v2.12
  • Linux 3.x
Dec 27, 2016Release notes
MXIO Library for Linux Kernel 4.x

2.1 MB

Library
SHA-512
v2.12
  • Linux 4.x
Dec 27, 2016Release notes
MXIO .NET Library for Windows

2.7 MB

Library
SHA-512
v1.10
  • Windows 10
  • Windows 7
  • Windows 8.1

Dec 27, 2016Release notes
MXIO Library for Windows

2.5 MB

Library
SHA-512
v2.12
  • Windows 10
  • Windows 7
  • Windows 8.1

Dec 25, 2016Release notes
MIB file for ioLogik E2210

15.7 KB

Software Package
SHA-512
v3.8
Feb 29, 2016Release notes
MIB file for ioLogik E2240

10.2 KB

Software Package
SHA-512
v3.8
Feb 29, 2016Release notes
MIB file for ioLogik E2212

18.5 KB

Software Package
SHA-512
v3.8
Feb 29, 2016Release notes
MIB file for ioLogik E2214

16.9 KB

Software Package
SHA-512
v3.8
Feb 29, 2016Release notes
MIB file for ioLogik E2242

13.8 KB

Software Package
SHA-512
v3.8
Feb 29, 2016Release notes
MIB file for ioLogik E2262

11.3 KB

Software Package
SHA-512
v3.8
Feb 29, 2016Release notes
MIB file for ioLogik E2260

11.0 KB

Software Package
SHA-512
v3.8
Feb 29, 2016Release notes
MXIO Library for Linux Kernel 2.6.x

1.8 MB

Library
SHA-512
v2.11
  • Linux 2.6.x
Feb 13, 2014Release notes
ioEventLog Utility

3.4 MB

Utility
SHA-512
v1.4
  • Windows 10
  • Windows 2000
  • Windows 7

Sep 21, 2008Release notes

Support Documents

NAME TYPE VERSION RELEASE DATE
Manual for ioLogik E2200 Series

11.9 MB

Manual v7.2 Aug 08, 2022
Datasheet for ioLogik E2200 Series

1.4 MB

Datasheet v1.3 May 19, 2022
QIG for ioLogik E2200 Series

281.2 KB

QIG v1.1 May 05, 2021
Manual for Click and Go V2

4.3 MB

Manual 3.2 Sep 11, 2020
Introduction to RTU Controllers

1.5 MB

Manual v1.0 Feb 24, 2012
2D CAD for ioLogik E2000

968.0 KB

2D CAD Nov 13, 2007
Supported Documents & Firmware Last Updated: February 6, 2023