TCC-80
5 products currently in stock. Call our team for lead times if needed.
£37.00
5 in stock (can be backordered)
TCC-80
£37.00
RS-232/422/485 Converter. Port Powered.
Introduction
The TCC-80/80I media converters provide complete
signal conversion between RS-232 and RS-422/485, without requiring
an external power source. The converters support both half-duplex
2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can
be converted between RS-232’s TxD and RxD lines.
Automatic data direction control
is provided for RS-485. In this case, the RS-485 driver is enabled
automatically when the circuitry senses the TxD output from the RS-232
signal. This means that no programming effort is required to control
the transmission direction of the RS-485 signal.
Port Power over RS-232
The RS-232 port of the TCC-80/80I is a DB9 female socket that can connect directly to the host PC, with power drawn from the TxD line. Regardless of whether the signal is high or low, the TCC-80/80I can obtain enough power from the data line. However, external power can be used if the handshake line is not available, if the serial cable is too long, or if the RS-232 device is a low-power device. For external power, a five to twelve VDC power supply can be connected using an adapter or a USB power cord.
Port Power Dissipation
When installing a TCC-80 or TCC-80I converter, it is important to pay attention to power consumption, RS-232 cable length, and RS-422/485 transmission distance. In general, the TCC-80 and TCC-80I obtain 50 mW of power from the power source. Standard PC COM ports can provide 70 to 90 mW of power if the TxD, RTS, and DTR lines are connected. Moreover, the RS-232 cable should be shorter than 15 m (@ 9600 bps) to ensure that less power is lost from the host/device to the TCC-80. The remainder of the supplied power is used for transmitting the RS-422/485 signal.
Port Power and Optical Isolation
The RS-232 port of the TCC-80/80I is a DB9 female socket that can connect directly to the host PC, with power drawn from the TxD line. Electrical 2.5 kV isolation for the TCC-80I is achieved with a photo coupler that transforms the electrical signal into light, and then re-transforms the light back into an electrical signal on the other side. In this way, the two electrical circuits are completely isolated from each other. This also protects the devices from ground loop currents, reduces damage caused by data loss, and prevents damage to the communication interfaces.
LED Port Power Indicator
It’s easy enough to test
the serial device with a multimeter to determine that the serial device
will provide enough power to the media converter. However, it’s even
easier to let the TCC-80I test the device for you. Simply connect
the TCC-80I to the device’s RS-232 port and set the SW4 switch to
Test mode. If the port power LED indicator lights up, the TCC-80I
is receiving enough power. If the LED does not light up, you will
need to attach an external power source to the TCC-80I.
Additional information
Connector | |
---|---|
RS-422 | |
RS-485-4w | |
RS-485-2w | |
Input Current | |
Input Voltage | |
Housing | |
Operating Temperature | 0 to 60°C (32 to 140°F) |
EMC | |
EMI | |
Time | |
Standards | |
Warranty Period | |
Details |
Need Support?
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Product Brand
TCC-80/80I Series
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Available on back-order
Module for ioThinx 4500 Series, 8 AIs, -10 to 10 V/0 to 10 V, -40 to 75°C operating temperature
£407.00
Available on back-order
x86 Computers. Intel 7th Celeron 3965U 2.2GHz. 4GbE, 4COM, 4DI/4DO, HDMI/DP, mSATA, Dual 2.5″ SSD/HDD slots, 2mPCIe, 4USB. SMA conn. 12-48VDC. -40 to 70°C W/IGT
£2,125.00
Available on back-order
Intel Core i5-7300U, 2C/4T, 2.6 GHz CPU, with 1x HDMI, 2 Gigabit LAN ports, 2 RS/232/422/485 3-in-1 serial port, 3 x mini PCIe expansion slot (1 for mSATA,2 for wireless module), 3 x USB 3.0, TPM2.0, 9-36VDC with 8GB RAM, -40 to 70°C temp.
£2,809.00
x86 2U Intel Core i7-7600U, dual power 100 to 240 VAC/VDC, -40 to 70°C temp, w/o RAM/SSD/OS
£5,307.00
12-inches Industrial Panel Computer,E3826 CPU, 4GB RAM, 500 nits, 4:3 aspect ratio, IP66 in front, touch
£2,039.00
Name | Type | Version | Release Date |
---|---|---|---|
|
Datasheet | v1.5 |
Dec 19, 2022 Dec 19, 2022 |
|
QIG | v4.1 |
May 06, 2021 May 06, 2021 |
|
2D CAD | Â | Jul 07, 2015 Jul 07, 2015 |
|
2D CAD | Â | Jul 07, 2015 Jul 07, 2015 |
Show All