Available on back-order
8-port,3-in-1 rugged device server,2×10/100M RJ45 1588v2,IRIGB module,110/220VDC/VAC,-40to85°C
The NPort S9650I Series 8/16-port RS-232/422/485 device servers, which come with a built-in full-function managed Ethernet switch, are designed specifically for the harsh environmental conditions found in electrical substations. With both fiber and wired Ethernet ports supported, the combination of a device server and Ethernet switch gives users the ability to easily install, manage, and maintain the NPort S9650I itself, as well as attached serial devices.
The NPort S9650I Series supports a high level of surge protection to prevent damage from the types of power surges and EMI one finds in electrical substations and industrial automation applications. Combined with a -40 to 85°C operating temperature range and galvanized steel housing, the NPort S9650I is suitable for a wide range of industrial environments.
Another plus is the NPort S9650I’s dual power supplies, which provide both redundancy, as well as a wide range of voltage inputs. The WV models accept a 24/48 VDC power input (ranging from 18 to 72 VDC), and the HV models accept a power input of 88 to 300 VDC and 85 to 264 VAC.
The current trend in power SCADA applications is to control and monitor both IT devices (switches, routers, etc.) and IEDs (sensors, actuators, etc.) with the MMS protocol. Contrast this with the more traditional management approach of using SNMP for IT devices and MMS for IEDs. In fact, SIs may even need to manage a variety of legacy devices that use proprietary communications protocols.
The NPort S9650I device servers are the world’s first device servers to integrate MMS into an IT-type device designed specifically for power SCADA applications. The NPort S9650I even supports using MMS to monitor serial communications between the S9650I and legacy devices.
The NPort S9650I Series provides maximum flexibility for integrating industrial Modbus/DNP3 networks of all types and sizes. The NPort S9650I is designed to integrate Modbus TCP, ASCII, and RTU devices in almost any master/slave combination, including simultaneous serial and Ethernet masters.
The NPort S9650I device servers also support protocol conversion between DNP3 serial and DNP3 IP, and all models are ruggedly constructed to ensure reliable operation.
The NPort S9650I Series has security features based on IEC 62443/NERC CIP to provide a high level of cybersecurity. Protecting mission-critical networks from cyberattacks is a high priority for industrial automation applications, which can suffer large losses due to extended network downtime.
The NPort S9650I Series, which has a modular design that supports IEEE 1588v2 and IRIG-B time synchronization, is able to interconnect and synchronize multiple types of intelligent electronic devices (IEDs) that use different communication protocols. The time source is provided via IEEE 1588v2 and converted to IRIG-B for distribution to the IEDs via the serial ports or via a dedicated IRIG-B BNC connector.
Device-level communication networks for industrial automation are very critical since they are used to control and monitor device processes. The reliability of these communications depends on ring redundancy at the device level, which is designed to provide fast network fault detection and reconfiguration to support the most demanding control applications. The NPort S9650I Series integrates a full-function NPort device server with an industrial switch to carry serial and Ethernet devices at the same time. In addition, the NPort S9650I Series can achieve ring redundancy with standard STP/RSTP and Moxa’s proprietary Turbo Ring or Turbo Chain 2 redundancy protocols. This all-in-one design can be used to optimize and simplify your device network and enhance reliability.
Alarm Contact Channels | |
---|---|
Magnetic Isolation Protection | |
Optical Fiber | |
IGMP Groups | |
Max. No. of VLANs | |
Configuration Options | |
PWM/PPS Output, DB9 Female | |
PWM Input, BNC Connector | |
Connector | |
No. of Ports | |
Serial Standards | |
RS-232 | |
RS-422 | |
RS-485-4w | |
RS-485-2w | |
MIB | |
Redundancy Protocols | |
Security | HTTPS/SSL, Local Account Accessibility, TACACS+, RADIUS, SSH |
Terminator for RS-485 | |
Console Port | |
Ethernet Interface | |
Automatic Reboot Trigger | |
Alert Tools | |
No. of Power Inputs | |
Reverse Polarity Protection | |
Input Current | |
Housing | |
Installation | |
Dimensions | |
Weight | |
Operating Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | |
EMC | |
EMI | |
EMS | |
Environmental Testing | |
Power Substation | |
Safety | |
Shock | |
Vibration | |
Green Product | |
Time | |
Standards |
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
8-port fiber ST, rugged device server,2×10/100M RJ45 1588v2,2xFiber single-SC,110/220VDC/VAC,-40to85°C
Available on back-order
8-port fiber ST, rugged device server,2×10/100M RJ45 1588v2,2×10/100M RJ45,110/220VDC/VAC,-40to85°C
Available on back-order
8-port fiber ST, rugged device server,2×10/100M RJ45 1588v2,2xFiber multi-SC,110/220VDC/VAC,-40to85°C
Available on back-order
8-port,3-in-1 rugged device server,2×10/100M RJ45 1588v2,2xFiber single-SC,110/220VDC/VAC,-40to85°C
Available on back-order
8-port,3-in-1 rugged device server,2×10/100M RJ45 1588v2,2xFiber multi-SC,110/220 VDC/VAC,-40to85°C
Available on back-order
8-port,3-in-1 rugged device server,2×10/100M RJ45 1588v2,2×10/100M RJ45,110/220 VDC/VAC,-40 to 85°C
Available on back-order
16-port fiber ST, rugged device server,2×10/100M RJ45 1588v2,2xFiber single-SC,110/220VDC/VAC,-40to85°C
Available on back-order
16-port fiber ST, rugged device server,2×10/100M RJ45 1588v2,2xFiber multi-SC,110/220VDC/VAC,-40to85°C
Available on back-order
16-port fiber ST, rugged device server,2×10/100M RJ45 1588v2,2×10/100M RJ45,110/220VDC/VAC,-40to85°C
Available on back-order
16-port,3-in-1 rugged device server,2×10/100M RJ45 1588v2,2xFiber single-SC,110/220VDC/VAC,-40to85°C
Available on back-order
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature
8 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -10 to 60°C operating temperature
4 in stock (can be backordered)
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -10 to 60°C operating temperature
2 in stock (can be backordered)
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -10 to 60°C operating temperature, PROFINET enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -10 to 60°C operating temperature
Available on back-order
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, EtherNet/IP enabled
Available on back-order
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C operating temperature
2 in stock (can be backordered)
Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C operating temperature
Available on back-order
NAME | TYPE | CHECKSUM | VERSION | OPERATING SYSTEM | RELEASE DATE |
---|---|---|---|---|---|
2.2 MB |
Utility |
SHA-512
|
v2.7 |
|
Jun 28, 2023Release notes |
32.8 MB |
Software Package |
SHA-512
|
v1.4 |
|
May 02, 2023Release notes |
113.0 KB |
Driver |
SHA-512
|
v5.2 |
|
Jan 17, 2023Release notes |
114.9 KB |
Driver |
SHA-512
|
v4.2 |
|
Jan 17, 2023Release notes |
18.0 MB |
Library |
SHA-512
|
v1.1 |
|
Dec 22, 2022Release notes |
2.9 MB |
Firmware |
SHA-512
|
v1.1 |
|
Nov 01, 2021Release notes |
481.1 KB |
Software Package |
SHA-512
|
v1.2 |
|
Nov 01, 2021Release notes |
243.8 KB |
Software Package |
SHA-512
|
v1.1 |
|
Nov 01, 2021Release notes |
396.9 KB |
Software Package |
SHA-512
|
v1.1 |
|
Nov 01, 2021Release notes |
92.2 KB |
Driver |
SHA-512
|
v2.0 |
|
Oct 24, 2019Release notes |
95.0 KB |
Driver |
SHA-512
|
v3.0 |
|
Oct 24, 2019Release notes |
2.6 MB |
Driver |
SHA-512
|
v2.0 |
|
Aug 01, 2019Release notes |
2.9 MB |
Driver |
SHA-512
|
v3.1 |
|
May 20, 2019Release notes |
20.5 KB |
Software Package |
SHA-512
|
v1.0 |
|
Jan 18, 2019Release notes |
230.5 KB |
Driver |
SHA-512
|
v1.6 |
|
Nov 20, 2018Release notes |
1.2 MB |
Driver |
SHA-512
|
v1.14 |
|
Nov 19, 2018Release notes |
73.0 KB |
Driver |
SHA-512
|
v3.5 |
|
Nov 19, 2018Release notes |
1.6 MB |
Utility |
SHA-512
|
v1.6 |
|
May 14, 2012Release notes |
© 2023 IT4 Automation Ltd. All Rights Reserved