MGate 5103-T
0 products currently in stock. Call our team for lead times if needed.
£610.00
MGate 5103-T
£610.00
1-port Modbus/EtherNet/IP-to-PROFINET gateway, -40 to 75°C operating temperature
0 products currently in stock.
The stock was last updated at 11:27 am Monday, 22 April, 2024. Please contact us for lead times if needed.
Introduction
The MGate 5103 is an industrial Ethernet gateway
for converting Modbus RTU/ASCII/TCP or EtherNet/IP to PROFINET-based
network communications. To integrate existing Modbus devices onto
a PROFINET network, use the MGate 5103 as a Modbus master/slave or
EtherNet/IP adapter to collect data and exchange data with PROFINET
devices. The latest exchange data will be stored in the gateway. The
gateway will convert stored Modbus or EtherNet/IP data into PROFINET
packets so the PROFINET IO Controller can control or monitor field
devices.
Easy Configuration via Web Console
The MGate 5103 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5103 Series also supports a GSDML export function. GSDML files can be imported into PROFINET PLCs to save time on PLC configuration.
Modbus RTU/ASCII/TCP Protocol Traffic Monitor
MGate 5103 gateways support Modbus RTU/ASCII/TCP Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave IDs and register addresses, that were entered incorrectly, or an incorrect command configuration. With Modbus RTU/ASCII/TCP Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.
Maintenance Functions
MGate 5103 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators.
Additional information
Management | |
---|---|
Authentication | |
Encryption | |
Console Port | |
RS-232 | |
RS-422 | |
RS-485-2w | |
Configuration Options | |
Industrial Protocols | |
Input Data Size | |
Output Data Size | |
RS-485 Data Direction Control | |
Terminator for RS-485 | |
Isolation | |
Functions Supported | |
Max. No. of Client Connections | |
Max. No. of Commands | |
Mode | |
microSD Slot | |
Input Voltage | |
Input Current | |
Power Connector | |
Contact Current Rating | |
Housing | |
IP Rating | |
Dimensions | |
Weight | |
Operating Temperature | -40 to 75°C (-40 to 167°F) |
Ambient Relative Humidity | |
Safety | |
EMC | |
Time | |
Standards |
Need Support?
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Product Brand
MGate 5103 Series
Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature
Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C operating temperature
Managed Gigabit Ethernet switch with 8 10/100BaseT(X) ports with 802.3bt PoE, 4 100/1000BaseSFP ports, dual power inputs 12/24/48 VDC, -10 to 60°C operating temperature
Managed Ethernet switch with 6 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors, dual power inputs 12/24/48 VDC, -40 to 75°C operating temperature
L2 Managed Ethernet switch, 8 * 10/100/1000BaseT(X) with 802.3at PoE+ and 4 * 10/100/1000 BaseT(X) M12 connectors, power input 24 – 110 VDC, -40 to 70°C operation temperature, conformal coating model
8 * FE with 802.3at PoE+ M12 ports, power input 24 – 110 VDC, conformal coating, -40 to 75℃ operation temperature
L2 Managed Ethernet switch, 12 * 10/100BaseT(X) and 4 * 10/100/1000 Base-T(X) M12 connectors, power input 24 – 110 VDC, -40 to 75℃ operation temperature, conformal coating model
Name | Type | Version | Operating System | Release Date | |
---|---|---|---|---|---|
|
Utility |
DC896CA58822B47BB2C85B25D4F391E82BCC8890522C7C4A8407D6AB07943693364883E44A389792B419B0B8CF125BE19E0D71F0144074F00CE859110D308977 SHA-512
|
v1.3 |
Show More
|
Jun 29, 2023 Jun 29, 2023 Release notes |
|
Utility |
A4A6137B7B59DFA30231958FF83FE4D15315B6D06935E892112CE7252F5E0E163D72A1D24D1ADE48F107A0A5E138A2AF569BE0EBF1331261B061DA1904A7BD47 SHA-512
|
v1.3 |
Show More
|
Jun 29, 2023 Jun 29, 2023 Release notes |
|
Utility |
9F3E3C6A2BBDCBFC53A91CAA82372972B0A9888CB75C1F9F8E32324F50FF8A0FF7500417AB873469B00AE8C20EE6C0D0C8C50CB94BFC3517AE604879244440FD SHA-512
|
v2.7 |
Show More
|
Jun 28, 2023 Jun 28, 2023 Release notes |
|
Software Package |
BC3C2EF37445EED1E65F1912C7344433F7A79268C1AE85EC75CCCEC77A8235136124639515E15DBE6240E592A5A2954F3A5D501E52B89DEA007654254705C62C SHA-512
|
v1.1.0 |
Show More
|
Feb 08, 2023 Feb 08, 2023 Release notes |
|
Software Package |
BE1C57655A0C398122DA1BB48984E0751203A262B51EAB83F91C06F0B2FAA0DFA71D5F311CE83CCA6E6FAE6C807EB69652281F199DA48132DF8048001AC5151D SHA-512
|
v3.2.8 |
Show More
|
Oct 31, 2022 Oct 31, 2022 Release notes |
|
Firmware |
16438F42F8BABAC9C8F1C97D46241D21A4A1FDD8452113BC253FA5FA5513124A4B6427BAECAE9453E7286D6B34D917CD495C55D94ADDA8A6BE01E84441AE37C4 SHA-512
|
v2.3 |
|
Apr 29, 2022 Apr 29, 2022 Release notes |
|
Software Package |
92839A279E440C9663304019291349B60D99D06B9B5DB5AF0A12D6AEA9571FC391E829B585686A44CDC036A29BA9FD46C923476DC3A5F45FE249AA1B4381C3E6 SHA-512
|
v1.1 |
Show More
|
Mar 31, 2021 Mar 31, 2021 Release notes |
|
Software Package |
C1B5A4F50BBFEB619F069639AA3AF41A9285533AF974E35BDB9025F81B8B95D37DBB3DBED4024F03523DF06EE58E596340C5437906214CF14487B2B1DAC86A51 SHA-512
|
v1.1 |
Show More
|
Mar 31, 2021 Mar 31, 2021 Release notes |
|
Software Package |
C4409781890038B16CEE590AF4C0DCDF846D934268C118B3DC808C1F66FE8A4DFB7BDAF32318D62437FD9AF0620E2C9F032475214B45D906C0BBA8D83E43F842 SHA-512
|
v1.0 |
|
Jan 14, 2018 Jan 14, 2018 Release notes |
|
Software Package |
5E246F34518024CB0D2C139CA307F4C761E29E747B59DA52EF4D451A0D2AE3CC10CBFF105A5F3FDE15F891B6223B30A5156281D1E1272F097790BEE678493A88 SHA-512
|
v1.0 |
|
Jan 14, 2018 Jan 14, 2018 Release notes |
|
Software Package |
3A710880A09766DF0F0756CDAD2A8C97ADD312976BBFC03273381EF1A46A1E68CD50FA267BDA9CE6B2CAB174ED444AA6F13DEA2591E33E9712AA40717E35FDF7 SHA-512
|
v2.0 |
|
Jan 14, 2018 Jan 14, 2018 Release notes |
Show All
Supported Documents
Name | Type | Version | Release Date |
---|---|---|---|
|
Manual | v2.1 |
Mar 28, 2023 Mar 28, 2023 |
|
Datasheet | v1.1 |
Feb 08, 2022 Feb 08, 2022 |
|
Tech Note | v2.1 |
Jan 13, 2022 Jan 13, 2022 |
|
QIG | v1.3 |
Apr 28, 2021 Apr 28, 2021 |
|
Tech Note | v1.0 |
Mar 02, 2020 Mar 02, 2020 |
|
Tech Note | v1.1 |
Aug 15, 2019 Aug 15, 2019 |
|
Manual | v1.0 |
Dec 22, 2017 Dec 22, 2017 |
|
2D CAD | Â | Sep 05, 2017 Sep 05, 2017 |
Show All