MGate 5105-MB-EIP Series
- Connects fieldbus data to cloud through generic MQTT
- Â Supports MQTT connection with built-in device SDKs to Azure/Alibaba Cloud
- Â Protocol conversion between Modbus and EtherNet/IP
- Â Supports EtherNet/IP Scanner/Adapter
- Â Supports Modbus RTU/ASCII/TCP master/client and slave/server
- Â Supports MQTT connection with TLS and certificate in JSON and Raw data format
- Â Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis
- Â microSD card for configuration backup/duplication and event logs, and data buffering when cloud connection is lost
-  -40 to 75°C wide operating temperature models available
- Â Serial port with 2 kV isolation protection
- Â Security features based on IEC 62443
Introduction
The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communications with IIoT applications, based on MQTT or third-party cloud services, such as Azure and Alibaba Cloud. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus master or slave to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices. The MQTT standard with supported cloud solutions on the MGate 5105-MB-EIP leverages advanced security, configuration, and diagnostics to troubleshoot technologies to deliver scalable and extensible solutions that are suitable for remote monitoring applications such as energy management and assets management.
Configuration Backup via microSD Card
The MGate 5105-MB-EIP is equipped with a microSD card slot. A microSD card can be used to back up both the system configuration and system log, and can be used to conveniently copy the same configuration to several MGate 5105-MP-EIP units. The configuration file stored in the microSD card will be copied to the MGate itself when the system is rebooted.
Effortless Configuration and Troubleshooting via Web Console
The MGate 5105-MB-EIP also provides a web console to make configuration easy without having to install an extra utility. Simply log in as an administrator to access all settings, or as a general user with read-only permission. Besides configuring basic protocol settings, you can use the web console to monitor I/O data values and transfers. In particular, I/O Data Mapping shows data addresses for both protocols in the gateway’s memory, and I/O Data View allows you to track data values for online nodes. Moreover, diagnostics and communication analysis for each protocol can also provide helpful information for troubleshooting.
Redundant Power Inputs
The MGate 5105-MB-EIP has dual power inputs for greater reliability. The power inputs allow simultaneous connection to 2 live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to-EtherNet/IP gateways ideal for demanding industrial applications.
PRODUCTS IN THIS SERIES
1-port Modbus RTU to EtherNet/IP gateway, 0 to 60°C operating temperature
£492.00
1-port Modbus RTU to EtherNet/IP gateway, -40 to 75°C operating temperature
£619.00
Other Series
Software, Firmware, and Drivers
| NAME | TYPE | CHECKSUM | VERSION | OPERATING SYSTEM | RELEASE DATE |
|---|---|---|---|---|---|
|
2.0 MB |
Utility |
SHA-512
|
v1.3 |
|
Jun 29, 2023Release notes |
|
11.6 MB |
Utility |
SHA-512
|
v1.3 |
|
Jun 29, 2023Release notes |
|
2.2 MB |
Utility |
SHA-512
|
v2.7 |
|
Jun 28, 2023Release notes |
|
32.8 MB |
Software Package |
SHA-512
|
v1.4 |
|
May 02, 2023Release notes |
|
277.4 MB |
Software Package |
SHA-512
|
v1.1.0 |
|
Feb 08, 2023Release notes |
|
417.7 MB |
Software Package |
SHA-512
|
v3.2.8 |
|
Oct 31, 2022Release notes |
|
8.4 MB |
Firmware |
SHA-512
|
v4.4 |
|
Apr 29, 2022Release notes |
|
5.3 MB |
Utility |
SHA-512
|
v1.17 |
|
Apr 29, 2022Release notes |
|
24.3 MB |
Software Package |
SHA-512
|
v1.1 |
|
Mar 31, 2021Release notes |
|
2.2 MB |
Software Package |
SHA-512
|
v1.1 |
|
Mar 31, 2021Release notes |
|
3.6 KB |
Software Package |
SHA-512
|
v2.0 |
|
Mar 23, 2018Release notes |
|
4.6 KB |
Software Package |
SHA-512
|
v2.0 |
|
Mar 23, 2018Release notes |
|
Firmware for MGate 5105-MB-EIP Series (Before upgrading to firmware v3.0 or higher, please make sure you have already upgraded the unit to v2.0.)
7.4 MB |
Firmware |
SHA-512
|
v2.0 |
|
Mar 20, 2018 |
|
14.9 KB |
Software Package |
SHA-512
|
v1.0 |
|
Jul 24, 2013Release notes |
Support Documents
| NAME | TYPE | VERSION | RELEASE DATE |
|---|---|---|---|
|
1.0 MB |
Manual | v2.1 | Mar 28, 2023 |
|
6.8 MB |
Manual | v7.1 | Mar 27, 2023 |
|
721.9 KB |
Datasheet | v1.2 | Feb 08, 2022 |
|
979.2 KB |
Tech Note | v2.0 | Oct 21, 2021 |
|
1.8 MB |
Tech Note | v1.0 | Jul 15, 2021 |
|
407.0 KB |
QIG | v2.3 | Apr 28, 2021 |
|
1.3 MB |
Tech Note | v1.0 | Apr 03, 2019 |
|
1.3 MB |
Tech Note | v1.0 | Apr 03, 2019 |
|
898.3 KB |
Tech Note | v1.0 | Mar 31, 2019 |
|
3.1 MB |
Tech Note | v1.0 | Jan 06, 2015 |
|
1.6 MB |
Tech Note | v1.0 | Jan 06, 2015 |
|
3.9 MB |
Tech Note | v1.0 | Jan 06, 2015 |
|
2.7 MB |
Tech Note | v1.0 | Jan 06, 2015 |
|
802.2 KB |
Tech Note | v1.0 | Nov 27, 2013 |
|
478.1 KB |
Tech Note | v1.0 | Sep 24, 2013 |
|
809.3 KB |
Tech Note | v1.0 | Jul 30, 2013 |
|
147.2 KB |
2D CAD | Jul 25, 2013 |