ICF-1150 Series

Industrial RS-232/422/485 to fiber converters
  • 3-way communication: RS-232, RS-422/485, and fiber
  • Rotary switch to change the pull high/low resistor value
  • Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
  • -40 to 85°C wide-temperature range models available
  • C1D2, ATEX, and IECEx certified for harsh industrial environments
Series Description

Introduction

The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

Three-Way Communication

The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.

Rotary Switch for Setting the Pull High/Low Resistor

The RS-485 interface supports multidrop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers, together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.

PRODUCTS IN THIS SERIES

Industrial RS-232/422/485 to Fiber Optic Converter, ST Multi-mode, with 2kV 2-way Galvanic Isolation

£304.00

Available on back-order

Add to quote

Industrial RS-232/422/485 to Fiber Optic Converter, ST Single mode, -40 to 85 ℃, IECEx Certification Approval

£618.00

Available on back-order

Add to quote

Industrial RS-232/422/485 to Fiber Optic Converter, SC Multi-mode, -40 to 85 ℃

£304.00

Available on back-order

Add to quote

Industrial RS-232/422/485 to Fiber Optic Converter, SC Single mode, with 2kV Serial Isolation, -40 to 85 ℃, IECEx Certification Approval

£791.00

Available on back-order

Add to quote

Industrial RS-232/422/485 to Fiber Optic Converter, SC Single mode

£410.00

Available on back-order

Add to quote

Industrial RS-232/422/485 to Fiber Optic Converter, SC Multi-mode, -40 to 85 ℃, IECEx Certification Approval

£351.00

Available on back-order

Add to quote

Other Series

Select some options
Filter By Product Series
A series refers to a collection of related products or components designed to work together seamlessly, typically within a specific industry or application. These series often share similar features and functionalities, ensuring compatibility and ease of integration for users.
Supported Documents
Name Type Version Release Date


Datasheet for ICF-1150 Series



729.5 KB

Datasheet
v1.6

Nov 09, 2022

Nov 09, 2022


QIG for ICF-1150 Series



1.6 MB

QIG
v8.2

Oct 17, 2022

Oct 17, 2022


2D CAD for ICF-1150-M-SC Model



71.2 KB

2D CAD  
May 20, 2016

May 20, 2016


2D CAD for ICF-1150-M-SC



481.4 KB

2D CAD  
May 20, 2016

May 20, 2016


2D CAD for ICF-1150-S-SC



472.9 KB

2D CAD  
May 20, 2016

May 20, 2016


2D CAD for ICF-1150-M-ST



533.9 KB

2D CAD  
May 20, 2016

May 20, 2016


2D CAD for ICF-1150I-M-SC



500.1 KB

2D CAD  
May 20, 2016

May 20, 2016


2D CAD for ICF-1150I-M-ST



636.5 KB

2D CAD  
May 20, 2016

May 20, 2016

Show All

WLAN Standards
Select some options
WLAN Standards
WLAN Modes
Select some options
WLAN Modes
Wiring
Select some options
Wiring
Wireless Signal Strength
Select some options
Wireless Signal Strength
Wireless Security
Select some options
Wireless Security
Windows Real COM Drivers
Select some options
Windows Real COM Drivers
Windows Drivers
Select some options
Windows Drivers
White Balance
Select some options
Wet Contact (DI to COM)
Select some options
Wet Contact (DI to COM)
Weight
Select some options
Weight
WDR (wide dynamic range)
Select some options
Wattage
Select some options
Wattage
Warranty Period
Select some options
Warranty Period
Wall mounting (standard)
Select some options
Voltage Range
Select some options
Voltage Range
Voltage
Select some options
Voltage
Viewing Angles
Select some options
Viewing Angles
Video Streams
Select some options
Video Standards
Select some options
Video Output
Select some options
Video Output
Video Motion Detection
Select some options
Video Input
Select some options
Video Input
Accuracy
Select some options
Accuracy
Video Compression
Select some options
Vibration
Select some options
Vibration
Acquisition
Select some options
Acquisition
Version Supported
Select some options
Version Supported
Active Display Area
Select some options
Active Display Area
AGC (auto gain control)
Select some options
Velocity Accuracy
Select some options
Velocity Accuracy
Alarm Contact Channels
Select some options
Alarm Contact Channels
Alert Tools
Select some options
Alert Tools
Altitude
Select some options
Altitude
V.S.W.R.
Select some options
V.S.W.R.
User Programmable
Select some options
User Programmable
Ambient Relative Humidity
Select some options
Ambient Relative Humidity
Analog Input Channels
Select some options
Analog Input Channels
USB Standards
Select some options
USB Standards
Analog Output Channels
Select some options
Analog Output Channels
USB Connector
Select some options
USB Connector
Antenna Length
Select some options
Antenna Length
USB 3.0
Select some options
USB 3.0
Antenna Type
Select some options
Antenna Type
USB 2.0
Select some options
USB 2.0
Aspect Ratio
Select some options
Aspect Ratio
Audio Format
Select some options
Audio Inputs
Select some options
Authentication
Select some options
Authentication
Typical Efficiency
Select some options
Typical Efficiency
Authentication Methods
Select some options
Authentication Methods
Typical Current (cold start)
Select some options
Typical Current (cold start)
Automatic Reboot Trigger
Select some options
Automatic Reboot Trigger
Typical Current
Select some options
Typical Current
Azure IoT Edge Preintegrated
Select some options
Azure IoT Edge Preintegrated
Typical Antenna Gain
Select some options
Typical Antenna Gain
Band Options
Select some options
Band Options
Type
Select some options
Type
Band Options (EU)
Select some options
Band Options (EU)
TTL
Select some options
TTL
Band Options (US)
Select some options
Band Options (US)
Transmitter Power for 802.11g
Select some options
Transmitter Power for 802.11g
Baudrate
Select some options
Baudrate
Transmitter Power for 802.11b
Select some options
Transmitter Power for 802.11b
BLC (back light compensation)
Select some options
Transmitter Power for 802.11a
Select some options
Transmitter Power for 802.11a
Board-side Connector
Select some options
Board-side Connector
Transmission Rate
Select some options
Transmission Rate
Body Color
Select some options
Body Color
Transmission Distance
Select some options
Transmission Distance
Boot Delay Interval
Select some options
Boot Delay Interval
Breakdown Voltage
Select some options
Breakdown Voltage
Traffic Control
Select some options
Traffic Control
Broadcast Forwarding
Select some options
Broadcast Forwarding
TPM
Select some options
TPM
Browser
Select some options
Touch Type
Select some options
Touch Type
Bus
Select some options
Bus
Touch Support Points
Select some options
Touch Support Points
Buttons
Select some options
Buttons
Cable
Select some options
Cable
Total PoE Power Budget
Select some options
Total PoE Power Budget
Cable Length
Select some options
Cable Length
Total Output Data Size
Select some options
Total Output Data Size
Cable Type
Select some options
Cable Type
Camera Angle
Select some options
Time Pulse
Select some options
Time Pulse
CAN
Select some options
CAN
Time Management
Select some options
Time Management
CAN Ports
Select some options
CAN Ports
Time
Select some options
Time
Carrier Approvals
Select some options
Carrier Approvals
ThingsPro Proxy Utility
Select some options
ThingsPro Proxy Utility
ThingsPro Edge Preloaded
Select some options
ThingsPro Edge Preloaded
Thickness
Select some options
Thickness
Cellular Antenna Connectors
Select some options
Cellular Antenna Connectors
Cellular Standards
Select some options
Cellular Standards
Channel-to-Channel Isolation
Select some options
Channel-to-Channel Isolation
Channels
Select some options
Terminator
Select some options
Terminator
CIP Objects Supported
Select some options
CIP Objects Supported
System Power Input Channels
Select some options
System Power Input Channels
System Power
Select some options
System Power
System
Select some options
System
Synchronization
Select some options
Comm. Controller
Select some options
Comm. Controller
Switch Type
Select some options
Switch Type
Commands Invokable Via Jobs
Select some options
Commands Invokable Via Jobs
Communication Interface
Select some options
Communication Interface
Compatible Modules
Select some options
Compatible Modules
Concurrent VPN Tunnels
Select some options
Concurrent VPN Tunnels
Switch Settings
Select some options
Switch Settings
Strip Length
Select some options
Strip Length
Storage Temperature
Select some options
Storage Temperature
Configuration Options
Select some options
Configuration Options
Connection
Select some options
Connection
<