NPort 5150A
4 products currently in stock. Call our team for lead times if needed.
£139.00
4 in stock (can be backordered)
NPort 5150A
£139.00
1 port device server, 10/100M Ethernet, RS-232/422/485, DB9 male, 0.5KV serial surge, 12~48VDC, 0~60°C
4 products currently in stock.
The stock was last updated at 11:32 am Friday, 19 April, 2024. Please contact us for lead times if needed.
Introduction
NPort® 5100 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort 5100 device servers to give your PC software direct access to serial devices from anywhere on the network.
Most Cost-effective Serial-to-Ethernet Solution
Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost-effective and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the NPort® 5100 Series provides the best choice for serial-to-Ethernet converters.
Adjustable Termination and Pull High/Low Resistors
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for each serial port.
Standard TCP/IP Interface and Broad Choice of Operation Modes
The NPort® 5100 device servers can be configured for TCP Server, TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode, ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets).
Real COM/TTY Drivers for Existing Software
The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating through COM/TTY ports. Installation and configuration are painless, and allows your serial devices and PC to communicate seamlessly over a TCP/IP network. Using Moxa’s Real COM/TTY drivers is an excellent way to preserve your software investment while still allowing you to enjoy the benefits of networking your serial devices.
Easy to Troubleshoot
NPort® 5100 device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an email alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a change in password.
Additional information
Configuration Options | |
---|---|
Management | DHCP Client, ARP, BOOTP, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP |
Filter | |
Authentication | |
Encryption | |
Connector | |
RS-232 | |
RS-422 | |
RS-485-4w | |
No. of Power Inputs | |
Input Current | |
Input Voltage | |
Automatic Reboot Trigger | |
RS-485 Data Direction Control | |
Terminator for RS-485 | |
Housing | |
Dimensions (with ears) | |
Dimensions (without ears) | |
Installation | Desktop, DIN-rail mounting (with optional kit), Wall mounting |
Operating Temperature | 0 to 60°C (32 to 140°F) |
EMC | |
Green Product | |
Time | |
Standards | |
Warranty Period | |
Details |
Need Support?
We understand that it can be difficult to find the right products for your needs. That’s why our dedicated customer support team is available to assist you in any way possible. Whether you need help selecting the best product for your application or more information on a particular device, our knowledgeable staff is here to provide you with the answers you need. Contact us today for more information about how we can help you get the products and support you need!
Product Brand
NPort 5100 Series
1 port device server, 10/100M Ethernet, RS-232/422/485, DB9 male, 0.5KV serial surge, 12~48VDC, -40~75°C
£182.00
1 port device server, 10/100M Ethernet, RS-422/485, DB9 male, 0.5KV serial surge, 12~48VDC, 0~60°C
£132.00
2 in stock (can be backordered)
1 port device server, 10/100M Ethernet, RS-422/485, DB9 male, 0.5KV serial surge, 12~48VDC, -40~75°C
£176.00
1 port device server, 10/100M Ethernet, RS-232, DB9 male, 0.5KV serial surge, 12~48VDC, 0~60°C
£114.00
1-port device server, 10/100M ethernet, RS-232/422/485 DB9 male, 12~48 VDC, 0~55°C
£128.00
23 in stock (can be backordered)
1 port device server, 10/100M Ethernet, RS-232, DB9 male, 0.5KV serial surge, 12~48VDC, -40~75°C
£176.00
Managed Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with ST connectors, and 2 combo 10/100/1000BaseT(X) or 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, 0 to 60°C operating temperature
£1,872.00
Available on back-order
Managed full Gigabit Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 combo 10/100/1000BaseT(X) or 100/1000BaseSFP slots for adding SFP-1G/1FE series Gigabit/fast Ethernet modules, -40 to 75°C operating temperature
£1,302.00
3 in stock (can be backordered)
Layer 3 Full Gigabit managed Ethernet switch with 12 slots for 4-port 10/100/1000BaseT(X) module or 4-port 100/1000BaseSFP slot module, 2 isolated power supplies (85 to 264 VAC), -10 to 60°C operating temperature
£10,241.00
Available on back-order
Layer 2 full Gigabit modular managed Ethernet switch with 4 fixed Gigabit ports, 2 slots for optional 4-port GE/FE modules, 2 slots for isolated power modules, up to 12 Gigabit ports, -10 to 60°C operating temperature
£1,791.00
Available on back-order
Layer 3 modular managed Ethernet switch with 4 100/1000BaseSFP ports, 3 slots for Ethernet modules, PoE Ethernet module supported, 1 isolated power supply (24/48 VDC), -40 to 75°C operating temperature
£5,582.00
Available on back-order
Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connectors, -40to75°C operatingtemperature
Industrial Unmanaged Ethernet Switch with 14 10/100BaseT(X) ports, 2 long-haul (80 km) single mode 100BaseFX ports, SC connector, -10 to 60°C
£2,097.00
Available on back-order
Managed full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, and 4 100/1000Base SFP slots, -40°C to 75°C operating temperature
£1,211.00
Available on back-order
Modular managed Ethernet switch with 8 10/100BaseT(X) ports, 2 10/100/1000BaseT(X) or 100/1000BaseSFP combo ports, and 2 slots for fast Ethernet modules, front cabling, 1 isolated power supply (24 VDC), -40 to 75°C
£1,300.00
Available on back-order
Available on back-order
Software, Firmware, and Drivers
NAME | TYPE | CHECKSUM | VERSION | OPERATING SYSTEM | RELEASE DATE |
---|---|---|---|---|---|
2.0 MB |
Utility |
SHA-512
|
v1.3 |
|
Jun 29, 2023Release notes |
11.6 MB |
Utility |
SHA-512
|
v1.3 |
|
Jun 29, 2023Release notes |
2.2 MB |
Utility |
SHA-512
|
v2.7 |
|
Jun 28, 2023Release notes |
123.0 KB |
Driver |
SHA-512
|
v6.0 |
|
May 04, 2023Release notes |
32.8 MB |
Software Package |
SHA-512
|
v1.4 |
|
May 02, 2023Release notes |
277.4 MB |
Software Package |
SHA-512
|
v1.1.0 |
|
Feb 08, 2023Release notes |
5.4 MB |
Driver |
SHA-512
|
v4.1 |
|
Feb 01, 2023Release notes |
113.0 KB |
Driver |
SHA-512
|
v5.2 |
|
Jan 17, 2023Release notes |
114.9 KB |
Driver |
SHA-512
|
v4.2 |
|
Jan 17, 2023Release notes |
NPort Administrator Suite v3.2 (Windows 7 to 8.1 and Windows Server 2008 R2 to 2016, WHQL certified)
4.1 MB |
Driver |
SHA-512
|
v3.2 |
|
Jan 17, 2023Release notes |
7.7 MB |
Driver |
SHA-512
|
v4.0 |
|
Jan 17, 2023Release notes |
18.0 MB |
Library |
SHA-512
|
v1.1 |
|
Dec 22, 2022Release notes |
6.8 MB |
Driver |
SHA-512
|
v3.5 |
|
Dec 01, 2022Release notes |
417.7 MB |
Software Package |
SHA-512
|
v3.2.8 |
|
Oct 31, 2022Release notes |
611.6 KB |
Driver |
SHA-512
|
v1.1 |
|
Sep 26, 2022Release notes |
419.1 KB |
Firmware |
SHA-512
|
v3.10 |
|
Jul 26, 2022Release notes |
24.3 MB |
Software Package |
SHA-512
|
v1.1 |
|
Mar 31, 2021Release notes |
2.2 MB |
Software Package |
SHA-512
|
v1.1 |
|
Mar 31, 2021Release notes |
422.1 KB |
Firmware |
SHA-512
|
v2.10 |
|
Mar 31, 2021Release notes |
92.2 KB |
Driver |
SHA-512
|
v2.0 |
|
Oct 24, 2019Release notes |
95.0 KB |
Driver |
SHA-512
|
v3.0 |
|
Oct 24, 2019Release notes |
2.6 MB |
Driver |
SHA-512
|
v2.0 |
|
Aug 01, 2019Release notes |
4.1 MB |
Driver |
SHA-512
|
v2.0 |
|
Feb 11, 2019Release notes |
930.8 KB |
Utility |
SHA-512
|
v1.15 |
|
Jun 29, 2014Release notes |
230.5 KB |
Driver |
SHA-512
|
v1.6 |
|
Nov 14, 2012Release notes |
1.6 MB |
Utility |
SHA-512
|
v1.6 |
|
May 13, 2012Release notes |
1.2 MB |
Driver |
SHA-512
|
v1.14 |
|
Apr 04, 2012Release notes |
73.0 KB |
Driver |
SHA-512
|
v3.5 |
|
Support Documents
NAME | TYPE | VERSION | RELEASE DATE |
---|---|---|---|
20.0 MB |
Manual | v7.0 | Jun 13, 2023 |
479.5 KB |
Tech Note | v2.0 | Jun 08, 2023 |
372.3 KB |
Tech Note | v2.0 | Jun 08, 2023 |
394.5 KB |
Tech Note | v2.0 | Jun 08, 2023 |
364.5 KB |
Tech Note | v2.0 | Jun 08, 2023 |
397.2 KB |
Tech Note | v2.0 | Jun 08, 2023 |
395.0 KB |
Tech Note | v2.0 | Jun 08, 2023 |
544.0 KB |
Tech Note | v2.0 | Jun 08, 2023 |
497.2 KB |
Tech Note | v2.0 | Jun 08, 2023 |
389.7 KB |
Tech Note | v2.0 | Jun 08, 2023 |
429.4 KB |
Tech Note | v2.0 | Jun 08, 2023 |
379.2 KB |
Tech Note | v2.0 | Jun 08, 2023 |
1.7 MB |
Tech Note | v2.1 | May 30, 2023 |
100.3 KB |
Tech Note | v1.0 | May 18, 2023 |
1.0 MB |
Manual | v2.1 | Mar 28, 2023 |
18.7 MB |
Manual | v6.8 | Sep 05, 2022 |
777.5 KB |
Datasheet | v1.8 | Jul 28, 2022 |
372.3 KB |
Tech Note | v1.0 | Aug 05, 2021 |
530.2 KB |
QIG | v4.3 | Apr 23, 2021 |
1.9 MB |
Tech Note | v1.0 | Nov 17, 2014 |
1.0 MB |
Tech Note | v1.0 | Mar 29, 2012 |
253.0 KB |
Tech Note | v1.0 | Nov 03, 2009 |
371.9 KB |
2D CAD | Aug 03, 1995 | |
371.9 KB |
2D CAD | Aug 03, 1995 | |
371.9 KB |
2D CAD | Aug 03, 1995 |